Shop by Brand

The 72mm Large Spanner Wrench is compatible with all Skunk2 previous generation Pro-S Version 1 Coilovers, current Pro-S II, Pro-C, and Adjustable Sleeve Coilovers. These Spanner Wrenches are required to make ride height and spring pre-load adjustments...

Skunk2 now offers B-Series Air Temp block off plate for applications where the Air Temp is no longer used. This plate is CNC machined from 6061 aluminum and comes with mounting hardware. Ultra Series Street Air Temperature Blockoff; B/D/H/F Engines; For...

Skunk2  Alpha Header 06-11 Civic Si The Skunk2 Alpha Header for the 06-11 Honda Civic Si w/ k20z3 motor w/ free shipping. This highly affordable and powerful header which takes from the design from the race proven megapower header from skunk2...

The Skunk2 Alpha Header for the Honda S2000, priced at 449.00 shipped. This exhaust header provides an amazing bang for the buck, designed by the team over at skunk2 to make power from low to high. This isnt just another S2000 header, skunk2 went and...

Skunk2 Alpha Header RSX Base & Type-S & 02-05 Civic Si EP3 412-05-1910 The skunk2 4-2-1 Tri-Y Alpha Header for the 02-06 RSX BASE & Type-S Models, as well the 02-05 Civic Si EP3, part #412-05-1910. This k-series header is a top notch unit...

Skunk2’s all-aluminum, half-size Alpha Series Radiator for the 88-’91 Civic/CRX is a direct-fit upgrade designed to dramatically increase both cooling efficiency and engine performance. Alpha Series Radiators are manufactured from lightweight and durable...

Skunk2’s all-aluminum, full-size Alpha Series Radiator for the ’88-’91 Civic/CRX is a direct-fit upgrade designed to dramatically increase both cooling efficiency and engine performance. Alpha Series Radiators are manufactured from lightweight and...

Alpha Series Rods are forged from select 4340 chromoly steel and feature an H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such,...

Alpha Series Rods are forged from select 4340 chromoly steel and feature an H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such,...

Alpha Series Rods are forged from select 4340 chromoly steel and feature an H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such,...

Manufactured exclusively from super-clean, chrome-silicone wire milled in Japan, Skunk2’s Alpha Valve Springs for Honda’s D-series VTEC engines are a product of the company’s years of racing and engine building experiences. Alpha Valve Springs are able...

Alpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same...

Alpha Series Rods are forged from select 4340 chromoly steel and feature an H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such,...

Alpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same...

Alpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same...

Alpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same...

Alpha Series Rods are forged from select 4340 chromoly steel and feature a straight H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same...

Skunk2 H Series Alpha Valve Spring and Titanium Retainer Kit for H22A Alpha Series Valve Spring And Retainer Kit; Seat Pressure 50 Lbs At 1.400 in.; Open Pressure 205 Lbs At 0.900 in.; Coil Bind 0.880 in.; Incl. Dual Valve Springs/Titanium...

Skunk2 is proud to introduce its 70mm Alpha Series Throttle Body for Hondas B-series engines (also compatible with D-, F-, and H-series) in its exclusive, fine shot-blasted surface finish. Skunk2's 70mm Alpha Series Throttle Body is designed to be used...

Engineers at Skunk2 Racing have developed primary and secondary fuel rails for the popular Ultra-Series Race intake manifold. Skunk2’s newest fuel rails are made from 6061-T6 aluminum, features large 0.669-inch internal bores and -8 AN o-ring thread, and...

Engineers at Skunk2 Racing have developed primary and secondary fuel rails for the popular Ultra-Series Race intake manifold. Skunk2’s newest fuel rails are made from 6061-T6 aluminum, features large 0.669-inch internal bores and -8 AN o-ring thread, and...

Skunk2 presents the B-Series Throttle Cable Bracket for the Ultra Series Race and Street Manifold. No longer will you need to fabricate your own Throttle Bracket for race applications. B Series Race And Street Throttle Cable Bracket; For Use w/Ultra...

Skunk2 now offers B-Series VTEC solenoid block off plate for applications where the VTEC solenoid is no longer used. This plate is CNC machined from 6061 aluminum and comes with mounting hardware. Available in either black or raw finish. Utilizes the...

Allen Bolt for Tuner and Pro-Series Ball Joints. Features M6x1.0x22mm thread pitch bolt with included M6 Split washer and 13mm O.D. Flat Washer. Camber Kit Bolts; For Ball Joint Plate; Set of 8; 1 Order = 4 x Bolts; 4 x Split Washers and 4 x Flat Washers

EK Camber Kit Bushing for 96-2000 Honda Civic Camber Kit Replacement Bushing; Press-In Style; For Use w/Pro/Classic Series Front Camber Kit; Sold Individually Fitment: Honda Civic CX 1996 to 2000 Honda Civic DX 1996 to 2000 Honda Civic EX 1996 to...

Based on Skunk2’s classic adjustable camber kit design it’s offered for more than a decade, Skunk2 designed its Tuner Series Front Camber Kit for the 92-95 Civic, 93-97 del Sol, and 94-01 Integra with the budget-conscious enthusiast in mind. Enthusiasts...

The Skunk2 Composite Fuel Rail is a high flow fuel rail built for the 06-11 Honda Civic Si K20Z3 motor. The composite is composed of a carbon impregnated aerospace thermo-polymer composite, which insulates from radiant and conductive heat transfer. This...

Get noticed with a genuine Skunk2 “GO FASTER.” license plate frame today, featuring Skunk2’s popular tag line and classic Skunk2 logo. Skunk2 license plate frames are just another way for you to show your love for the brand and to let others know the...

Multiple Layer Steel (MLS) type of gaskets have increased strength against vibration and corrosion, and have of multi-layers of steel with an additional sealing layer. This additional layer is an HR-180 Rubber coating for superior sealing. MLS head...

Multiple Layer Steel (MLS) type of gaskets have increased strength against vibration and corrosion, and have of multi-layers of steel with an additional sealing layer. This additional layer is an HR-180 Rubber coating for superior sealing. MLS head...

Multiple Layer Steel (MLS) type of gaskets have increased strength against vibration and corrosion, and have of multi-layers of steel with an additional sealing layer. This additional layer is an HR-180 Rubber coating for superior sealing. MLS head...

Skunk2 head studs are made from 8740 steel, heat treated to 190k PSI. Cylinder Head Studs; Incl. 8740 Chromoly Studs/Hardened Washers/12-Point Nuts/Assembly Lube; Set Of 10; Do NOT Fit the Non-VTEC B Series Engines Unless VTEC Head is Used

Skunk2’s industry-leading Alpha Titanium Retainers are designed to significantly reduce valvetrain mass, resulting in more horsepower and improved valvetrain stability. Similar to Skunk2’s already popular Pro Series Titanium Retainers, Alpha Titanium...

K Ultra BMF2 RA VTEC Camshafts Ultra Series BMF2 Camshaft; Intake Dur./Lift 278 Deg./0.640 in.; Exhaust Dur./Lift 289 Deg./0.580 in.; Set of 2; Camshaft Specifications:; Intake:; 289deg. @ 0.050in. duration; 0.635in. lift @ 0.000in. lash; Exhaust:;...

Skunk2’s Fine Tuning products and accessories, like its high-pressure Radiator Caps, help put the finishing touches onto your vehicle you work so hard to make perform well. Skunk2 Radiator Caps increase internal radiator pressure, which results in a...

Skunk2 Short Shifter Hardware Kit Short Throw Shifter Hardware Kit; For Use w/EF/DA/EG/DC/EC Applications; Fitment: 1988 Honda Civic Base 1988 Honda Civic DX 1988 Honda Civic LX 1988 Honda Civic Wagovan 1988 Honda CRX DX 1988 Honda CRX HF 1988 Honda...

The engineers at Skunk2 Racing have worked tirelessly to develop the next generation of high performance intake manifolds and are proud to announce the release of the much anticipated Ultra Series Intake Manifold. Years of R&D have culminated in a...

Replacement Ultra Street Plenum Gasket for B/K Series Skunk2 Racing manifolds. Ultra Series Street Plenum Gasket; B/K Engines; Fitment: 1990 Acura Integra GS 1990 Acura Integra LS 1990 Acura Integra RS 1991 Acura Integra GS 1991 Acura Integra LS 1991...

Skunk2’s Fine Tuning products and accessories, like its Polished Billet Oil Caps for most Honda and Acura engines, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2’s racing heritage and...

Skunk2’s Fine Tuning products and accessories, like its Black Series Billet Oil Caps for most Honda and Acura engines, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2’s racing heritage and...

Skunk2’s Fine Tuning products and accessories, like its Hard Anodized Billet Oil Caps for most Honda and Acura engines, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2’s racing heritage and...

Skunk2 Honda K Series 4 Bar MAP Sensor Skunk2 is proud to offer a 4-Bar MAP Sensor for K-series engines. Skunk2 MAP sensors are plug-in compatible and are direct replacements for Honda’s factory-issued MAP sensor. 4-Bar MAP Sensor; Direct...

Skunk2s advanced high temperature thermal polymer material protects against heat soak and maximizes horsepower gains by reducing heat transfer. With the use of Skunk2 thermal gaskets, air intake temps are minimized which provides the engine cooler air...

Skunk2 Honda L15B7 1.5T DOHC Ultra Stage 2 Camshaft

Skunk2 Honda L15B7 Ultra Valve Springs and Spring Base Kit 2016-2021 Honda Civic 1.5T All Skunk2 valve springs control are made from super-clean high tensile strength chrome-silicone wire, shot peen stress relieved, and heat treated to provide...

Skunk2 Valve Keepers / Locks for Honda/Acura B/D/F/H VTEC and K Series VTEC Engines. Manufactured from bar stock and CNC machined for precision fit and finish. The Skunk2 Keeper / Locks are then heat-treated for ultimate strength and completed with Black...

Skunk2’s Viton Valve Stem Seals for popular Honda engines are designed to provide exceptional lubrication while keeping oil out of the combustion chamber. Only Viton is able to provide precise oil control and maximum durability, even at high rpm. Unlike...

Skunk2’s high-quality Spring Bases for Honda’s H-series VTEC engines are designed to allow any H-series VTEC cylinder head to accept Skunk2’s higher-performance, Pro Series Valve Springs and Titanium Retainers originally designed for B-series engines...

Skunk2’s high-quality Spring Bases for Honda’s K-series engines are designed to allow any K-series cylinder head originally equipped with single valve springs to accept higher-performance, dual valve springs, like those from Skunk2. Each Spring Base is...

Skunk2s advanced high temperature thermal polymer material protects against heat soak and maximizes horsepower gains by reducing heat transfer. With the use of Skunk2 thermal gaskets, air intake temps are minimized which provides the your engine cooler...

Skunk2’s Fine Tuning products and accessories, like its Black Series VTEC Solenoid Cover for Honda’s B-series, D-series, and H-series VTEC engines, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with...

Skunk2’s Fine Tuning products and accessories, like its Gunmetal VTEC Solenoid Cover for Honda’s B-series, D-series, and H-series VTEC engines, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with...

Skunk2’s Fine Tuning products and accessories, like its Black Series Billet Wire Covers for Hondas B-series VTEC engines, help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2’s racing heritage and...

The first of its kind, Skunk2’s Black Series Billet VTEC Solenoid is designed to be used with any B16A/B or B18C cylinder head and is compatible with Honda’s original pressure sensor, solenoid internals, and gasket. Billet VTEC Solenoids for Hondas...

Skunk2 is proud to introduce the most unique, low-profile dress-up hardware you’ve ever seen. An original design, Skunk2’s Low Profile Valve Cover Hardware kits are the only ones designed specifically for B-series valve covers. Low Profile Valve Cover...

The first of its kind, Skunk2’s Hard Anodized Billet VTEC Solenoid is designed to be used with any B16A/B or B18C cylinder head and is compatible with Honda’s original pressure sensor, solenoid internals, and gasket. Billet VTEC Solenoids for Hondas...

Skunk2 Thermal Intake Manifold Gaskets are designed as direct replacements for OEM gaskets. Skunk2s advanced high temperature thermal polymer material protects against heat soak and maximizes horsepower gains by reducing heat transfer. With the use of...

Skunk2 has done it again. While others are busy imitating our LCA’s, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Alpha Series Lower...

Skunk2 has done it again. While others are busy imitating our LCA’s, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Alpha Series Lower...

Skunk2 has done it again. While others are busy imitating our LCA’s, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Ultra Series Lower...

Skunk2 has done it again. While others are busy imitating our LCA’s, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Ultra Series Lower...

Skunk2 Alpha Rear Lower Control Arms are direct replacements for the factory OEM arms, and are ideal for street and race applications. Benchmarking off of our previous LCA design, our goal was to design an arm that was lighter, stronger, and more durable...

Skunk2 Alpha Rear Lower Control Arms are direct replacements for the factory OEM arms, and are ideal for street and race applications. Benchmarking off of our previous LCA design, our goal was to design an arm that was lighter, stronger, and more durable...

Skunk2 Alpha Rear Lower Control Arms are direct replacements for the factory OEM arms, and are ideal for street and race applications. Benchmarking off of our previous LCA design, our goal was to design an arm that was lighter, stronger, and more durable...

The first of its kind, Skunk2’s Black Series Billet VTEC Solenoid is designed to be used with any H22A cylinder head and is compatible with Honda’s original pressure sensor, solenoid internals, and gasket. Billet VTEC Solenoids for Hondas H-series VTEC...

Skunk2 Thermal Intake Manifold Gaskets are designed as direct replacements for OEM gaskets. Skunk2s advanced high temperature thermal polymer material protects against heat soak and maximizes horsepower gains by reducing heat transfer. With the use of...

Skunk2 is proud to introduce the most unique, low-profile dress-up hardware you’ve ever seen. An original design, Skunk2’s Low Profile Valve Cover Hardware kits are the only ones designed specifically for K-series valve covers. Low Profile Valve Cover...

Skunk2 is proud to introduce the most unique, low-profile dress-up hardware you’ve ever seen. An original design, Skunk2’s Low Profile Valve Cover Hardware kits are the only ones designed specifically for K-series valve covers. Low Profile Valve Cover...

Skunk2s advanced high temperature thermal polymer material protects against heat soak and maximizes horsepower gains by reducing heat transfer. With the use of Skunk2 thermal gaskets, air intake temps are minimized which provides the your engine cooler...

Iacv Relocation Kit For B/D Series Ultra Race Intake Manifold Ultra Series Race Intake Manifold LACV Relocator Kit; Incl. Bracket/Hose/Hardware; Designed to Use the Honda B or D Series IACV Motor.se the Honda B or D Series IACV Motor. Fitment: 1986...

The SKUNK2 K-Series intake and exhaust covers provide a simple storage and transportation solution for serious Honda K-Series engine builders. Racers, custom engine builders and home-garage mechanics all want to protect time and money spent on precious...

The Skunk2 Racing K-Series Billet Drop-in Oil Pan Baffle is for the serious hardcore racer. The baffle easily installs onto an existing K20A/K20A2/K20Z1 OEM Honda/Acura Oil Pan. The baffle sits flush with the oil pan floor and essentially "Boxes In" the...

Skunk2 K-Series i-VTEC Pro Series XP Valve Springs 311-05-7380 Skunk2 is proud to introduce its Pro Series XP (Extra Pressure) Racing Valve Spring Kits for the Honda K20/ K24 & F20C/ F22C VTEC engines. Each kit includes Skunk2’s high-quality...

42 percent lighter than OEM steel retainers. Pair with Tuner Series or Pro Series Valve Springs for the ultimate valvetrain. Please note: When using Skunk2 Titanium Retainers (P/N 308-05-0410) on 2004 and newer engines, pre-2004 keepers (cotters) must be...

We've streamlined the process and revised the design of the K Series Ultra Fuel (350-05-7000) to replace the Ultra Fuel Rails listed below. The Skunk2 Racing K Fuel Rail is the perfect compliment to the Ultra Street Manifold and especially the Ultra Race...

Set your keys apart with a Skunk2 lanyard. Featuring the Skunk2 classic logo. Classic Logo Lanyard; Black w/White/Red Classic Logo;

Skunk2 Fender Washers were designed to replace the factory hardware with stainless steel bolts flush-mounted inside of our unique, hard-anodized aluminum washers. Each kit includes six low-profile, 20mm-diameter washers and six flush-mounted, stainless...

Get noticed with a genuine Skunk2 “live the dream.” license plate frame today, featuring Skunk2’s popular tag line and classic Skunk2 logo. Skunk2 license plate frames are just another way for you to show your love for the brand and to let others know...

Skunk2 Lowering Springs for Honda Acura Applications Looking to improve your handling, lower your vehicle on a budget? Introducing the skunk2 lowering spring, skunk2 has been an industry leader for Honda and Acura vehicle applications and these...

Gasket Kit for Mazda Miata '94-'97 64 MM Throttle Body Replacement Gasket Kit for Miata NA Throttle Body Fitment: 1994 Mazda Miata Base 1994 Mazda Miata M Edition 1995 Mazda Miata Base 1995 Mazda Miata M Edition 1996 Mazda Miata Base 1996 Mazda Miata M...

Similar to Skunk2’s industry-leading Pro-C and Pro-SII Coilovers, Pro-ST Coilovers feature threaded shock bodies, Pro-ST Coilovers offer height adjustments independent of spring preload, which help maintain adequate suspension travel on lowered vehicles...

Gasket Kit for Mazda Miata '99-'05 64 MM Throttle Body. Replacement Gasket Kit for Miata NB Throttle Body Fitment: Mazda Miata 10th Anniversary 1999 Mazda Miata Base 1999 to 2005 Mazda Miata LS 2000 to 2005 Mazda Miata Mazdaspeed 2004 to 2005 Mazda...

Similar to Skunk2’s industry-leading Pro-C and Pro-SII Coilovers, Pro-ST Coilovers feature threaded shock bodies. Pro-ST Coilovers offer height adjustments independent of spring preload, which help maintain adequate suspension travel on lowered vehicles...

Skunk2 MegaPower RR 17-21 Honda Civic Type-R FK8 Exhaust System Decades of race engineering are incorporated into every part Skunk2 develops. Our MegaPower Double Barrel (DB) Exhaust system for the '18-'20 Honda Civic Type R is no exception...

Skunk2’s Fine Tuning products and accessories, like its billet Shift Knobs for five-speed Nissans, Mitsubishi and Mazda help put the finishing touches onto your vehicle you work so hard to make perform well. Consistent with Skunk2’s racing heritage and...

Skunk2 designed its Pro Series Plus Front Camber Kit for the ’92-’95 Civic, 93-97 del Sol, and 94-01Integra with specially engineered A-arms and ball joints that allow for maximum positive camber adjustment in a low-profile design. Enthusiasts who are...

Skunk2’s Rear Camber Kit for the 01-05 Civic and 02-06 RSX is based off of the same adjustable camber kit technology the company’s been using on its own race cars for more than a decade. Skunk2’s Rear Camber Kit is a must-have for enthusiasts looking to...

Skunk2’s revised Nissan/Infiniti VQ35 Composite Intake Plenum Spacer V2.0 is dyno proven and road tested to outperform all other intake manifold plenum spacers. Skunk2’s Intake Plenum Spacer V2.0 features a number of improvements, including a thicker...

Skunk2 Pro Series 06-11 Honda Civic Gold Anodized Adjustable Rear Camber Kits Introducing Skunk2’s completely redesigned Gold Anodized Rear Camber Kit for the 2006-2011 Honda Civic. This innovative kit, suitable for the Si models, offers...

Skunk2 Pro Series 12-15 Honda Civic Gold Anodized Adjustable Rear Camber Kits Upgrade your Honda Civic (2012-2015) with the Skunk2 Rear Camber Arm, a must-have for both the Si and base models. Designed to provide precise camber adjustments, this...

Skunk2 Pro Series 12-15 Honda Civic Hard Anodized Adjustable Rear Camber Kits Upgrade your Honda Civic (2012-2015) with the Skunk2 Rear Camber Arm, a must-have for both the Si and base models. Designed to provide precise camber adjustments, this...

Hard Anodized Rear Camber Kit for the 2016-2020 Civic is based off of the same adjustable camber kit technology the company has been using on its own race cars for more than a decade. Thanks to the new and unique telescoping, opposing-thread design,...

Gain an extra 12-15 hp and retain your factory idle and low-speed emissions with Skunk2's Tuner Series Stage 2 Camshafts, our premier line of high-performance camshafts for Honda's F20C/ F22C S2000 engines. Tuner Series Stage 2 Camshafts are designed to...

More than a decade ago, Skunk2s engineers revolutionized Honda performance by creating the first-ever, high-flow, cast aluminum intake manifold. Skunk2’s Pro Series Intake Manifold for most Honda SOHC D-series engines features a larger plenum and...

More than a decade ago, Skunk2s engineers revolutionized Honda performance by creating the first-ever, high-flow, cast aluminum intake manifold. Skunk2’s Pro Series Intake Manifold for Honda’s H-series features a larger plenum and oversized runners when...