Skunk2 Racing

B, K, D, F Ultra Race Manifold Gasket Replacement Ultra Series Race Plenum Gasket; Use When Changing/Adding Plenum Or Spacers To Manifold; Fitment: 1986 Acura Integra LS 1986 Acura Integra RS 1986...

EK Pro Plus Front Camber Kit for the 96-2000 Honda Civic Camber Kit Bushing Set; For Lower Control Arm Or Camber Kit; One Mounting/Connection Point w/Two Bushing Halves; Polyurethane; Includes two...

Skunk2 head studs are made from 8740 steel, heat treated to 190k PSI. Cylinder Head Studs; Incl. 8740 Chromoly Studs/Hardened Washers/12-Point Nuts/Assembly Lube; Set Of 10; Do NOT Fit the Non-VTEC B...

Skunk2 Racing Ultra Series Intake Manifolds are the next generation of high performance intake manifolds. The much anticipated K-Series Street model is now available. Proudly presented by the Skunk2...

Skunk2 17-21 Honda Civic Type R Downpipe Kit w/ Cat Decades of race engineering are incorporated into every part Skunk2 develops. Built to fit the '17-'21 Honda Civic Type R engine, our Alpha...

Skunk2s 84mm - 90mm Big-Bore Throttle Body Cold-Air Intake Coupler allows for easy installation of Skunk2s ’06-’11 Civic Si Cold-Air Intake when using a Pro Series Throttle Body or...

Similar to Skunk2’s industry-leading Pro-C Coilovers, Pro-S II Coilovers for the 96-00 Civic feature adjustable ride height and a state-of-the-art mono-tube design. Thanks to threaded shock bodies,...

A properly designed exhaust system is critical to engine performance. Skunk2’s 70mm MegaPower Exhaust system for the 07-11 Civic Si sedan was developed with this in mind and is based off of more than...

A properly designed exhaust system is critical to engine performance. Skunk2’s 70mm MegaPower Exhaust system for the 06-11 Civic Si coupe was developed with this in mind and is based off of more than...

Skunk2’s Rear Camber Kit for all ’88-’00 Civics and ’90-’01 Integras, including CRXs and del Sols, is based off of the same adjustable camber kit technology the company’s been using on its own race...

Skunk2’s Fine Tuning products and accessories, like its Short-Throw Shift Adapter for the 06-08 Civic Si, help put the finishing touches onto your vehicle you work so hard to make perform well...

Skunk2 has done it again. While others are busy imitating our LCA’s, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is...

Engineered to racing specifications, tested and proven over decades on winning racing teams. Integrating the highest-level technologies into an affordable street-spec coilover, our systems are a...

Skunk2 Silicone Radiator Hoses are handmade using high-quality, automotive-grade silicone and feature cutting-edge, multi-layer, embedded fiber linings that’ll resist even the most abusive engine...

Featuring the same engineering practices as the, industry-leading, Pro-C and Pro-S II Coilovers. Skunk2 Racings high-performance, factory-replacement Sport Shocks for the ’12-’13 Civic use most of...

Skunk2 Racing's Pro-ST Coilovers for '96-'00 Civic are engineered as the best single adjustable suspension system on the market at a price point you can afford! Serious club racers and discerning...

The O2 sensor wire harness extension is designed for 2006-2014 Civic Sis. These extensions are great for installing an aftermarket header where the oem O2 sensor wires arent long enough to reach the...

A properly designed exhaust system is critical to engine performance. Skunk2’s 60mm MegaPower Exhaust system for 96-00 CX and DX hatchbacks featuring B-series engine swaps was developed with this in...

Skunk2s engineers went back to the drawing board when they set out to improve the already popular 06-11 Civic Si’s RBC intake manifold. Each of Skunk2’s Pro Series Intake Manifolds for Honda’s...

Similar to Skunk2’s industry-leading Pro-C Coilovers, Pro-S II Coilovers for the 92-95 Civic and 94-01 Integra feature adjustable ride height and a state-of-the-art mono-tube design. Thanks to...

Skunk2 Thermal Intake Manifold Gaskets are designed as direct replacements for OEM gaskets. Skunk2s advanced high temperature thermal polymer material protects against heat soak and maximizes...

We've streamlined the process and revised the design of the K Series Ultra Fuel (350-05-7000) to replace the Ultra Fuel Rails listed below. The Skunk2 Racing K Fuel Rail is the perfect compliment to...

A properly designed exhaust system is critical to engine performance. Skunk2’s 60mm MegaPower Exhaust system for the 04-08 TSX was developed with this in mind and is based off of more than 15 years’...

Skunk2’s all-aluminum, half-size Alpha Series Radiator for the 88-’91 Civic/CRX is a direct-fit upgrade designed to dramatically increase both cooling efficiency and engine performance. Alpha Series...

Skunk2 designed its Pro Series Front Camber Kit for the ’04-’08 TSX with specially engineered A-arms and ball joints that allow for maximum positive camber adjustment in a low-profile design...

Fourth-Generation Civic and CRX owners rejoice! The Skunk2 Pro Series Front Camber Kit is finally here. Skunk2 designed the Pro Series Front Camber Kit for the '88-'91 Civic and CRX with specially...

Skunk2 designed its Pro Series Front Camber Kit for the ’92-’95 Civic, 93-97 del Sol, and 94-01 Integra with specially engineered A-arms and ball joints that allow for maximum positive camber...

Corner faster, stop quicker, and improve the look of your vehicle with Skunk2s legendary Lowering Springs.Skunk2 Lowering Springs for the ’01-’05 Civic (non-Si) are designed to dramatically improve...

Taking cues from its industry-leading Pro-C and Pro-S II Coilovers, Skunk2’s high-performance, factory-replacement Sport Shocks for the ’94-’01 Integra employ many of the same technologies and...

Skunk2’s Hard Anodized Rear Lower Control Arms for the ’02-’06 RSX and 03-08 Element are based off of the same technology the company’s been using on its own race cars for more than a decade and are...

Skunk2’s Gold Anodized Rear Lower Control Arms for the ’02-’06 RSX and 03-08 Element are based off of the same technology the company’s been using on its own race cars for more than a decade and are...

Skunk2’s Black Series Rear Lower Control Arms for the ’01-’05 Civic are based off of the same technology the company’s been using on its own race cars for more than a decade and are a must-have for...

Skunk2’s Fine Tuning products and accessories, like its Single-Bend Short-Throw Shifters for all ’88-’00 Civics and ’90-’01 Integras, including CRXs and del Sols, help put the finishing touches onto...

Please remove this part number it is discontinued Engine Bay Dress Up Timing Chain Cover; 2 Pc Design; Incl. Low Profile Stainless Steel Hardware; For Use w/K24 Engines; 6061-T6 Billet Aluminum;...

Skunk2 Pro Series 88-91 Honda Civic/90-93 Acura Integra/04-08 Acura TSX Front Camber Kit Ball Joint Optimize Your Suspension with the Skunk2 Pro Series Front Camber Kit. The Skunk2 Pro Series Front...

Skunk2 is synonymous with innovation, so it’s no surprise that its engineers took the company’s highly successful and widely copied Pro Series Ball Joints and made them even better. Pro Series Ball...

Skunk2 has done it again. While others are busy imitating our LCA’s, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is...

Skunk2’s cutting-edge Composite Fuel Rail for Honda’s K-series engines (non-Civic Si) is here. Skunk2’s Composite Fuel Rails are made using a proprietary carbon-impregnated, aerospace thermo-polymer...

Skunk2 designed its Pro Series Plus Front Camber Kit for the ’92-’95 Civic, 93-97 del Sol, and 94-01Integra with specially engineered A-arms and ball joints that allow for maximum positive camber...

Skunk2 designed its Pro Series Front Camber Kit for the ’96-’00 Civic with specially engineered A-arms and ball joints that allow for maximum positive camber adjustment in a low-profile design...