Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Gold

Skunk2 has done it again. While others are busy imitating our LCA’s, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Ultra Series Lower Control Arms for the ’88-’95 Civic/ CRX and ’90-’01 Integra. The Ultra Series LCA’s are based off of the same technology the company’s been using in its own race cars for 20 years. Skunk2’s Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. The Ultra Series Lower Control Arm offers the hardcore racer and discerning enthusiast, the very best of the best. In a market full of “Me Too” Product, and recycled, annealed lower control arms, we took the Lower Control Arm back to the drawing board. Often not used due to the higher cost, we chose 7075-T6 because of its exceptional strength to weight ratio and fatigue strength. With an ultimate tensile strength of over 78,000 PSI, and fatigue strength of 23,000 psi for 500 million cycles – This is the perfect material for our game changing Ultra LCA’s. The result of our hard work is a 7075-T6 Forged Aluminum LCA, that is 19% lighter and 27% stronger than our previous generation of LCA’s. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this select combination of bushings allows the most comfort and control under any driving conditions. For hardcore race level handling, we have also added the option to replace the sub frame side elastomeric bushing with a high load steel spherical bushing for a no-nonsense track car. The bushing change can be done in minutes with basic tools Ultra Series Control Arm Set; Lower; 44 Percent Lighter Than OEM; Incl. Spherical Wheel Hub Joint/Elastomeric Bushings; Forged 7075-T6 Aluminum; Gold Anodized; Set of 2; Fitment: 1990 Acura Integra GS 1990 Acura Integra LS 1990 Acura Integra RS 1991 Acura Integra GS 1991 Acura Integra LS 1991 Acura Integra RS 1992 Acura Integra GS 1992 Acura Integra GS-R 1992 Acura Integra LS 1992 Acura Integra RS 1993 Acura Integra GS 1993 Acura Integra GS-R 1993 Acura Integra LS 1993 Acura Integra RS 1994 Acura Integra GS-R 1994 Acura Integra LS 1994 Acura Integra RS 1995 Acura Integra GS-R 1995 Acura Integra LS 1995 Acura Integra RS 1996 Acura Integra GS-R 1996 Acura Integra LS 1996 Acura Integra RS 1997 Acura Integra GS 1997 Acura Integra GS-R 1997 Acura Integra LS 1997 Acura Integra RS 1998 Acura Integra GS 1998 Acura Integra GS-R 1998 Acura Integra LS 1998 Acura Integra RS 1999 Acura Integra GS 1999 Acura Integra GS-R 1999 Acura Integra LS 2000 Acura Integra GS 2000 Acura Integra GS-R 2000 Acura Integra LS 2001 Acura Integra GS 2001 Acura Integra GS-R 2001 Acura Integra LS