Hondata 2000cc injectors for 2017-2021 FK8 2023-2027 FL5 DE5

Hondata 2000cc Injectors for FK8, FL5 Civic Type R and DE5 Integra Type S

If you're building a serious fuel system for your FK8, FL5, or DE5, these Hondata 2000cc injectors are the kind of upgrade that makes sense when the stock setup is no longer enough. Designed by Hondata and proudly manufactured in the USA, these high-flow injectors are built to support major power while still maintaining excellent drivability, smooth idle quality, and a stock-like spray pattern.

Compared to the factory FK8, FL5, and DE5 injectors, these injectors deliver roughly 90% more fuel flow, giving your setup a massive jump in fueling capacity without giving up proper atomization. That matters because more flow is only part of the equation. You also want the injector to behave correctly at idle and throughout the powerband, and that is exactly where this setup stands out.

Hondata designed these injectors to provide strong fuel atomization while supporting much more aggressive performance goals. They are calibrated at 100 BAR and tested to over 240 BAR, giving them the capability needed for high-demand applications. Hondata has tested these injectors to over 550 horsepower on E85, which indicates a horsepower capacity of more than 700 horsepower on race fuel.

These injectors are also E85 compatible, making them a strong option for anyone planning to run ethanol and push their Civic Type R or Integra Type S further. Whether you're building for a high-horsepower street car, race car, or future turbo setup that needs real fuel support, this matched set of four is designed to help take the factory direct injection system to the next level.

What’s Included

• Four 2000cc Hondata injectors
• Sold as a matched set of 4

Key Features

• 90% more flow than stock injectors
• Built to provide a major increase in fuel delivery over the stock FK2, FK8, FL5, and DE5 injectors.
• Stock-like spray pattern and atomization
• Engineered to maintain great fuel atomization and smooth idle characteristics.
• E85 compatible
• Ready for ethanol-based setups and higher performance fuel demands.

Designed by Hondata and manufactured in the USA

Built with quality and consistency in mind for serious performance applications.

Tested for high horsepower use

Calibrated at 100 BAR and tested to over 240 BAR. Proven by Hondata at over 550 HP on E85, with estimated potential of over 700 HP on race fuel.

Important Installation Warning

The Hondata 2000cc injector uses a blue plastic nipple that must be handled carefully during installation so it does not break. These injectors should be installed gently into the fuel rail one at a time using the retaining clips. Force is not needed and is not recommended. The retaining clip provides all necessary holding force.

During installation, the plastic nipple will likely make contact with the metal portion of the fuel rail. This plastic nipple is used to help reduce fuel pressure pulsations. Purchase and install these injectors at your own risk.

Any damage to the injectors during installation will not be covered under warranty. All sales are final. By purchasing this item, you agree to the terms listed on our website as well as the terms stated here.